Polyurethane foam Release Agent
Home > Products > Metal Casting Release Agent

Metal Casting Release Agent

Home > Products > Metal Casting Release Agent

High temperature Mold Release Agent

Item No.:MK-HT
SAKURAI release agent MK-HT, is a high temperature of 600 ℃ to 1500 ℃ resistant release agent.
Buy At Alibaba

High Temperature Mold Release Agent Spray  MK-HT


SAKURAI release agent MK-HT, is a high temperature of 600 ℃ to 1500 ℃ resistant release agent, environmental protection, non-toxic, have excellent film-forming properties, has protective effect to the mold which can make the product forming high transparency, smooth, increase the yield of product, at the same time can also be applied to other glass molding,such as: pipe, instrument,hot melt glass processing.

Product Features
1.Non-toxic, environmental protection products.
2.Good stripping performance,product demoulding smoothly finish.
3.Excellent heat resistance and film-forming properties,even in rapid heating at 1500 ℃ temperature, cooling repeatedly is not easy to be break.
4.Prolong the life of the mold, and shorten mold cleaning time, reduce surface defect products.


25 Liters/Barrel
200 Liters/Drum

Mould Release Agent

1. Are you a manufacturer or a trader?
We are one of leader manufacturer of Mold Release Agents in China.
2. Do you supply sample?
We supply free sample within 1kg and you got to pay for courier freight cost. The trial cost we refund to you on bulk order.
3. Do you supply concentrate or ready-to-use release agent?
Based on your choice, concentrate and ready-to-use are both available for your purchasing.
4. What is your shipping method and transportation?
For sample,we mostly deliver small packages by Fedex/DHL/TNT air cargo with door-to-door service, which are safe and reliable for chemical liquid delivery. For bulk order, sea transportation is our first choice to save shipping cost. We make efforts to satisfy your specify requirements.
5.What is your suggestions for sample trial?
First, We suggest that everytime you use a small quantity of samples to test. Because the quantity of samples is limited, PLEASE do not use up all the samples for testing in one-time. so you can test samples for many times. If first time testing is not good, then we can have a second chance to adjust the testing process. You should adjust a suitable dilution ratio according to the specific practical testing.
1532678891441551.jpgMould Release AgentMould Release Agent