Sakurai Mould Release agent sprayed onto the mold surface. The effective ingredients of the formation of dense films immediately. The membrane resistance to high pressure, Nai Chongshua, low coefficient of friction on the injection process (0.08mm-0.15mm), effectively prevent the die casting products and mold welding. To prevent from the type of anti adhesive product variant. At the same time the lubrication performance of excellent speed up the liquid aluminum liquidity, the aluminum liquid can quickly formed in the cavity. To avoid the product defects and strain.
2. Special surface finish
Sakurai series using rare special materials. It can effectively solve the casting surface blackening, water too much and avoid cold insulation. To solve the product after processing, such as: polishing and electroplating and other problems.
3.Fully protect the mould release agent
Sakurai in the mold surface to form a layer of protective film. Effectively reduce the aluminum liquid heat and mechanical impact on the action of mould. The correct selection of high quality mold release agent can effectively protect the mould, prolong die service time, reduce the times of repairing die.
4.No carbon property
Sakurai release agent used is very simple and convenient operation. No carbon deposition, no mold fouling, does not produce oxide skin. Reduce the times of mould and die Province, cleaning products, bright, smooth surface, without affecting the subsequent polishing and electroplating, spray surface treatment.
5.High temperature resistant performance superior
Sakurai release agent has good thermal stability and chemical stability. Temperature range in the use of no oxidation, no burning, no corrosion of mold and the surface decomposition residues. Even in the high temperature of 300 DEG C, the first few (heat first heavy weight not exceeding 10%). To ensure that, under the conditions of high temperature, mold release film forming strong on the mold. To suppress the high temperature burn clean. Lubrication and demoulding effect.
6.Good cooling effect
Sakurai release agent in the die casting process to effectively control the mould was constantly high temperature liquid metal is heated and the temperature rise, high mold temperature make die casting defects. Such as: sticking to mould, blistering, cracking and burn. At the same time the mold to mold material containing long-term high temperature work intensity decreased, resulting in decreased and the service life of the die crack.
7.High safety performance
Sakurai release agent non-toxic, non flammable, non corrosive, no chemical reaction. In the use of the process does not contain harmful smoke. No residual die and the surface of the product, cleaning and maintenance easy, wash the net, does not affect the subsequent processing.