Polyurethane Release Agent

Home > Polyurethane Release Agent

Mould Release Agent for Polyurethane PU Integral Skin

Item No.: MK-IS310
PU Intergral Skin Foam Release Agent is fluorine-modified methyl silicone resin and non-ion mircoemulsion.
Buy At Alibaba

Mould Release Agent for Polyurethane(PU) Integral Skin MK-IS310

Brief Introduction

Sakurai Release Agent for PU Intergral Skin Foam is fluorine-modified methyl silicone resin and non-ion mircoemulsion.

Physical index

Appearance Milky White Liquid
Solid Content 20%
Specific density,25°C About 0.80-0.83 g/ml
Ph Value  7.0-7.3
Emulsifier Types Nonionic


1.Car Integral Skin Foam Release Agent(Dumb light products)

2.Libricant and Adhesive

Applying Process

1.Polyurethane Integral Skin Foam release agent is lower viscosity,and after dilute to use.During the dilute, need to stir well milky white liquid.
2.The Pu integral skin release agent in order to use the matte integral skin cars parts demould, this product during the demould of the integral skin can reach the matte, good at surface of the product.


20 kg/barrel

160 kg/durm

Store and Indate

12 months under original sealed container during 20°C~30°C.Please

Refer to the storage of Suggestions and expiry date on the package

1. Are you a manufacturer or a trader?
We are one of leader manufacturer of Mold Release Agents in China.
2. Do you supply free sample?
We supply free sample within 1kg and you got to pay for courier freight cost. The trial cost we refund to you on bulk order.
3. Do you supply concentrate or ready-to-use release agent?
Based on your choice, concentrate and ready-to-use are both available for your purchasing.
4. What is your shipping method and transportation?
For sample,we mostly deliver small packages by Fedex/DHL/TNT air cargo with door-to-door service, which are safe and reliable for chemical liquid delivery. For bulk order, sea transportation is our first choice to save shipping cost. We make efforts to satisfy your specify requirements.
5.What is your suggestions for sample trial?
First, We suggest that everytime you use a small quantity of samples to test. Because the quantity of samples is limited, PLEASE do not use up all the samples for testing in one-time. so you can test samples for many times. If first time testing is failed, then we can have a second chance to adjust the testing process. You should adjust a suitable dilution ratio according to the specific practical testing.