Metal Casting Release Agent

Home > Metal Casting Release Agent

Mould release agent for Ultra thin Magnesium alloy die casting

Item No.: MK-TI
Sakurai MK-TI new environmentally friendly magnesium alloy mold release agents. For ultra thin thickness of 0.3mm or more of magnesium and thickness of 0.5mm or more large pieces of thin pieces. Such as: precision electronic parts.
Buy At Alibaba

Mould release agent for Magnesium alloy die casting MK-TI

Sakurai mold release agents MK-TI new environmentally friendly product for magnesium alloy . For ultra thin thickness of 0.3mm or more of magnesium and thickness of 0.5mm or more large pieces of thin pieces. Such as: precision electronic parts, computer housings, aviation products. This product does not contain HAP, PAHS and various heavy metals. Passed ROHS and REACH latest environmental standards. Comply with ISO9001 production quality indicators.

⊙ Product Features

1. Stable temperature performance

Using high temperature film forming materials, high-temperature mold surface with good adhesion, in a Mold temperature up to 320 ℃ operating temperature. Not in the mold and the casting surface carbon or Oxide.
2 .Excellent lubricating propeties

With temperature lubricant, film uniformity, do not build up at a high temperature to provide excellent Lubrication, the shaped cavity filled with molten metal Tangshun Li. While substantially reducing the Friction between the mold and the casting, making the products more smooth release and extended tool Life.
3 .Good heat dissipation and insulation properties

When an aqueous solution containing release agent mold surface when exposed to high temperature, Moisture evaporates quickly remove excess heat to ensure that mold in the design temperatures; Simultaneously release agent will be attached to the surface of the mold lubricating insulation film, high Temperature red rinse, ensuring magnesium alloy melting and rapid cooling soup will not fill smoothly Shaped cavity, after the separation, the casting surface does not affect the porosity and compaction.
4. Low odor properties

Smell is very soft, non-irritating odor in operation produces no oil mist generation, to maintain a good Environment for the workshop.
5 .Excellent corrosion resistance

Of magnesium alloy products have excellent oxidation corrosion protection, casting a clear outline, smooth surface does not affect the coating. 6 good safety performance - with a high degree of biodegradability, does not contain any hazardous ingredients.
6.Good cleaning performance

The mold surface is almost no residue, cleaning and maintenance is simple, the product surface smooth, free cleaning.

physicochemical data

smell Low odor Density (H2O) 1.10 PH
Appearance Milky white liquid temperature 200℃-300℃
Flash Point (COC) NA Refractive index @ 20 ℃ 1.2
Freezing point -10℃ Ph (5% dilution) 7

Use of guidance
1.  Place before using the machine and processing tank / pool deployment of a good clean then adding magnesium alloy processing fluid.
2.  Make sure 2-4 atm compressed working fluid spray evenly distributed in the mold surfaces while the mold surface temperature should not be lower than 180 ℃.
3. C
an be used for the simple shape of the casting once every two die coating, die coating complex castings each time.
4.  Is not recommended for the processing of reactive metals, such as: zirconium, and other materials.
5.  Strictly controlled concentration (periodic addition of new fluid) will help to extend the life of the whole groove machining fluid.
6. If the processing tank / pool appeared to be removed regularly appear slick, is conducive to inhibit bacterial  growth.
7.  Not allowed to add / mix other products.

Deployment instructions
1. Recommended dilution ratio depending on the concentration of the test site personnel deployment process, and finally to determine the optimum Dilution ratio!
2.In excess beyond the typical usage, please contact us for technical support.
3. Is mixed with water used (added to the concentrate diluted with water).
4. Try using deionized water to dilute and help extend the life of the working fluid, reducing the use of Concentrate fully reflect the performance of processing liquid.
5. Unless technical service department allowed, shall not add other substances to the concentrate and Diluent.
6.Can be controlled by the concentration and refraction coefficient obtained refractometer concentration dilution percentage.

⊙ Storage instructions
1. Avoid direct exposure to sunlight;
2. Avoid fire and heat exposure;
3. Avoid contact with strong oxidizing agents, strong alkalis, strong acids;
4. Avoid mixed with water;
5 Remove the lid part Concentrate should be promptly after Gaiyan to prevent contamination of product Packaging barrel;
6. Should be placed in the shade of the indoor storage;
7 .After long term storage darken the appearance of some of the products do not affect its effectiveness;
8.Place Products placed in 4 ~ 48 ℃ environment preservation, storage time should not exceed 12 months.

1. Are you a manufacturer or a trader?
We are one of leader manufacturer of Mold Release Agents in China.
2. Do you supply free sample?
We supply free sample within 1kg and you got to pay for courier freight cost. The trial cost we refund to you on bulk order.
3. Do you supply concentrate or ready-to-use release agent?
Based on your choice, concentrate and ready-to-use are both available for your purchasing.
4. What is your shipping method and transportation?
For sample,we mostly deliver small packages by Fedex/DHL/TNT air cargo with door-to-door service, which are safe and reliable for chemical liquid delivery. For bulk order, sea transportation is our first choice to save shipping cost. We make efforts to satisfy your specify requirements.
5.What is your suggestions for sample trial?
First, We suggest that everytime you use a small quantity of samples to test. Because the quantity of samples is limited, PLEASE do not use up all the samples for testing in one-time. so you can test samples for many times. If first time testing is failed, then we can have a second chance to adjust the testing process. You should adjust a suitable dilution ratio according to the specific practical testing.